The Thermal Ribbons - Novexx Solutions EIDOS XTO Series User Manual

Table of Contents

Advertisement

User Manual
XTO intermittent series

THE THERMAL RIBBONS

Smart-Black - XTO series ribbon
The XTO ribbons selection include two different wax-resin products (standard and special) available
in 1200m length and two different resin alternatives (standard and special) available in 1000m
length. Moreover is possible to print on craft films by a special ribbon.
All the ribbons are winded on 1 inch plastic core, ink IN.
Peculiar characteristics of the Eidos Smart-Black ribbon line are: high quality and high speed of
printing, maximum ribbon length, resistance to freezing and humidity, resistance to scratching, heat
resistance.
Using EIDOS ribbons is recommended for the protection and durability of the print head. The EIDOS
ribbons allow you to set "Intensity" of printing and "intelligence" to default values = 100. The use of
non-EIDOS ribbons with intensity values >> 100 and intelligence << 100 risks damaging the print
head in a short time.
Technical data
code
Ink
Speed max
Print intelligence
Enhanced mode
Resistance to smudge
Resistance to scratch
Resistance to freezing
Resistance to heat
Resistance to solvents
Flexible packaging PP
Aluminium (coffee, pet food, powder
protein)
Resistance to sterilization and boiling
Craft paper
Food approval
1= not enough 2=sufficient
x = 7 Length 1000 or 1200 m according to the model; x = 8 Length 600 m (the supply is subject to technical evaluation by EIDOS).
y = 7 Width 55 mm; y = 9 Width 30 mm
The rolls of thermal ribbon must be bought from the printer supplier in order to have the best
possible guarantee of operating efficiency.
Using uncertified ribbons makes malfunctions highly likely and may greatly increase damage to the
thermal head or cause dragging problems that are due to dirtying of the ribbon guide rolls.
Make sure you use the right thermal ribbon for each surface! Contact the supplier for tests
or certification. The printer's warranty does not extend to local damage to the head in the
form of mechanical nicks but only to normal uniform wear along the entire head.
Edition C - 01/2024
3xNE51y
wax/resin
600 (mm/s)
100
NO
3
3
5
2
2
3= discrete 4=good 5=excellent
3xNE52y
3xNE53y
wax/resin Premium
600 (mm/s)
500 (mm/s)
100
100-50
NO
4
5
5
3
3
31
3xNE54y
3xNE50y
resin
resin
wax/resin
300 (mm/s)
600 (mm/s)
120
NO
YES
5
5
5
5
5
5
4
5
4
5
100
NO
3
3
5
2
2
Operation

Advertisement

Table of Contents
loading

Table of Contents