Safety Notices; General Precautions - Novexx Solutions EIDOS XTO Series User Manual

User Manual XTO intermittent series
How information is represented
Explanation of symbols
WARNING!
A warning symbol refers to risks that can result in severe or fatal injuries! The text
within this area contains instructions for preventing damage.
➔
Instructions must be followed without exception.
WARNING! The text within this area contains important recommendations as well as additional
information or information to use the product correctly and efficiently.

SAFETY NOTICES

The printer is provided with a "EC Declaration of conformity" according to the "Machinery Directive
2006/42/EC" which includes the reference standards for "Electromagnetic Compatibility" and
"Electrical Safety":
Do not start up the machine without first reading and implementing the prescriptions of the
1.
"USER MANUAL" and the present "SAFETY NOTICES".
The printing unit is equipped with two covers: the first [RM1] is removable while the second
2.
[RM2] can be opened by rotating it on two hinges. The removable cover [RM1] is monitored
by two sensors [SENS_C1] and [SENS4] which switch off the power supply to the motors when
the cover is open. The presence of a mechanical interlock [IB1] does not allow you to open
the cover [RM2] without first removing the cover [RM1] and it does not allow you to insert
and close the cover [RM1] before closing the cover [RM2]. To prevent finger access in the
carriage [C1/C2] movement area [A/B], the XTO print unit and the print plate must always be
aligned with each other.
The printer must not be used in an explosive environment or be used to treat explosive
3.
materials.
The printer must not be used in irregular situations such as working without guards being
4.
correctly fitted to the machine; working with products other than those prescribed.
After 7 years of operation on an 8-hour daily shift, a complete overhaul of the product is
5.
recommended.

GENERAL PRECAUTIONS

Be careful when moving or carrying the printer. Wear safety shoes when installing or removing
1.
the printer from the packaging machine: dropping the printer may cause injury or property
damage. The machine must NOT be used by the lid or the handle. (See the "LIFTING AND
TRANSPORT" Chapter of the Technical Manual RT806).
Do not open the printer during printing.
2.
When cleaning the surface of the printer case, do not use the cloth that is soaked in thinner,
3.
trichloroethylene, benzine, ketone or similar chemicals.
Do not spill liquids or spray insecticide on the printer.
4.
When printer trouble occurs, do not try to dissemble it. Instead, consult our service personnel.
5.
Edition C - 01/2024 3 Information