Interrog; Purpose; Comments; Screen Dump Of The Results Printed When Running The Program Interrog - HP 8112A Operating, Programming And Servicing Manual

INTERROG

Purpose

Comments

The current setting of the HP 8112A is:
The current setting of location 5 is:
TY SO%,WID 500 US,LEE 100 US, TRE 100 US, HIL +l.OO V,LOL -4.56 V,
Width and slope error caused.
Errors read with IERR: WIDTH ERROR
Response after IPER command:
Response
after IHIL command:
Response after IBUR command:
End of the program INTERROG
10 ! Program name: INTERROG
2 0
3 0 ! Function: Demonstrate the usage of all types interrogate commands
40 !
5 0
60 !
7-18 Programming Examples
This program demonstrates the usage of all types of interrogate
commands offered by the HP8112A.
Please refer to the listing of the program for the exact usage of the
commands.
Below is a screen dump of the results printed when running the
program.
The interrogate parameter set commands IRCLO..S return the
Learn String of the given setting with a prefix that indicates from
which location the Learn String was loaded. For example, after the
command IRCL5 the response returned will start with the prefix SET
5:. This prefix must be cut off, if the Learn String shall be sent back
to the HP8112A.
The current setting of the HP8112A can be stored in another
location with the command ST0 1..9. For example, ST0 3 stores the
current setting in location 3.
Screen dump of the results printed when running the program
INTERROG
0001 #,PER 1.00 MS,DBL 200 US,DEL 65.0 NS,DTY 5 0
0001 #,PER 1.00 MS,DBL 200 US,DEL 66.0 NS,D
, EXCESSIVE SLOPE
PER 1.00
HIL +l.OO V
BUR 0001 #

Program listing

offered by the HP8112A.
MS