Dräger Primus Instructions For Use Manual page 37

Getting started
Breathing system
@ Complete and engaged, hoses firmly plugged in.
@ Insert optional filters.
@ Fresh soda lime, without violet discoloration.
Drain any water which may have collected in the ventilator
diaphragm.
Correct operation of the workstation will be impaired by =
condensation flowing back into the breathing system and
ventilator diaphragm.
@ install water traps in the hoses.
Care must be taken when connecting the patient. | | EN
Risk of strangulation! グ
AGS anaesthetic gas scavenging system
1 The transfer hose from the waste gas port must be
connected.
2 The scavenging hose must be connected, the anaesthetic
waste gas probe must be plugged into the Drager wall
socket and the indicator must be green.
3 The float must be between the two marks.
instructions for Use Primus SW 2.n
37