Table of Contents
Advertisement
298 Driving and parking
* NOTE Damage due to overheating of
charging cable and charge port
Charging cable and charge port may generate
heat within the permissible limiting values dur-
ing the charging process.
The heat generated by the charging cable and
charge port is influenced by the following fac-
tors:
The power supply of the mains supply and
R
the charging cable are intact.
The notes on operating the charging cable
R
and control element on the charging cable
were observed.
If the charging cable or the charge port
#
generate too much heat, have the power
supply of the mains supply checked.
* NOTE Damaged or dirty vehicle socket
when the socket flap is open
Always keep the socket cover and the
#
socket flap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
Make sure that the socket cover is
#
closed properly before closing the socket
flap. This can otherwise result in damage
which may prevent the socket flap from
being opened again.
Requirements
The vehicle is unlocked or the vehicle is locked
R
and the distance between the key and the
vehicle does not exceed 1 m.
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
F295 0057 02
Combo 1 vehicle socket
Press charging interruption button 2.
#
The charging process is ended. Status display
1
lights up white. The vehicle socket is
unlocked.
Advertisement
Table of Contents
