Mercedes-Benz EQE 2023 Operator's Manual page 172

170 Opening and closing
Example: with MBUX hyperscreen
Indicator lamp 1 flashes when the ATA system is
primed.
The ATA system is deactivated automatically in the
following situations:
After unlocking the vehicle with the key
R
After unlocking the vehicle using KEYLESS-GO
R
After unlocking with the NFC function (vehi-
R
cles with Digital Vehicle Key)
After pressing the start/stop button with the
R
key in the storage compartment
( page 259)
/
▌Deactivating the ATA
Press the Ü, s or H button on the
#
key.
or
Press the start/stop button with the key in the
#
storage compartment ( page 259)
/
Vehicles with Digital Vehicle Key: Press the
#
start/stop button with the Digital Vehicle Key
in the storage compartment (
Deactivating the alarm using KEYLESS-GO:
With the key outside the vehicle, touch the
#
inner surface of the door handle.
This also applies to the Digital Vehicle Key.
F295 0057 02
Function of tow-away protection
An audible and visual alarm is triggered if an alter-
ation to your vehicle's angle of inclination is
detected while tow-away protection is primed.
Tow-away protection is automatically primed after
about 60 seconds:
After locking the vehicle with the key
R
After locking the vehicle using KEYLESS-GO
R
This also applies to the Digital Vehicle Key.
After locking with the NFC function (vehicles
R
with Digital Vehicle Key:)
Tow-away protection is only primed when the fol-
page 258). lowing components are closed:
/
Doors
R
Boot lid
R
Tow-away protection is automatically deactivated:
After pressing the Ü or H button on the
R
key
After pressing the start/stop button with the
R
key in the storage compartment
( page 259)
/