Mercedes-Benz EQE 2023 Operator's Manual page 548

546 MBUX multimedia system
Answering a call with a message
Select s Answer w SMS.
#
Ending a call
Select k.
#
Putting a call on In-Car Office's to-do list
Select À Put call on In-Car Office's to-do
#
list.
▌Activating functions during a call
The following functions are available during a call:
k End call
R
m Micro. off
R
_ Keypad (show to send DTMF tones)
R
Á Add call
R
Hands-free
R
Transfer the call, e.g. to Front,
seats.
Private mode
R
Transfer the call to the telephone or head-
phones, for example.
Select a function.
#
%
Observe that the functions and symbols can
vary depending on the vehicle equipment.
▌Conducting calls with several participants
Requirements
There is an active call (
R
Another call is being made.
R
Switching between calls
Select the contact.
#
The selected call is active. The other call is on
hold.
Activating a call on hold
Select the contact of the call on hold.
#
Conducting a conference call
Select  Conference.
#
Rear or All
The new participant is included in the confer-
ence call.
Ending an active call
Select k
#
page 545).
/
End call.
F295 0057 02
%
On some mobile phones, the call on hold is
activated as soon as the active call is ended.
▌Accepting or rejecting a waiting call
Requirements
There is an active call ( page 545).
/
R
If you receive a call while already in a call, a mes-
sage is displayed.
Depending on the mobile phone and mobile
phone network provider you will hear a call wait-
ing signal.
Alternatively, in two phone mode you will hear an
acoustic signal when the call goes through to the
other (not yet active) mobile phone.
Select R Accept.
#
The incoming call is active.
If only one mobile phone is connected with
the multimedia system, the previous call will
be put on hold.
If during a call you accept a call with the other
mobile phone when in two phone mode then
the existing call is ended.
or