Table of Contents
Advertisement
Operating unit in the rear passenger compartment
1
Rear reading lamp
p
To switch on or off: press button 1.
#
Adjusting the ambient lighting
Multimedia system:
©
Comfort
Ambient light
4
5
5
Setting the colour
Select Colour.
#
Select
Monochrome
or Multi-colour.
#
Set the desired colour or colour scheme.
#
Energy Shine
The interactive Energy Shine colour world
R
shows the different phases during a journey.
Depending on the type of driving condition
(speed, boost effect or recuperation), this is
shown in colour by the active ambient lighting.
Adjusting the brightness
Select Brightness.
#
Adjust the brightness.
#
%
Depending on the ambient light conditions,
the ambient lighting will automatically switch
between day and night modes.
Activating the brightness for zones
Select Brightness.
#
Switch off
Link zones
.
#
The Direct,
Indirect
and
Accents
set separately.
%
The
Light strip
zone can also be set in vehi-
cles with active ambient lighting.
F295 0057 02
Activating effects
& WARNING Risk of accident if ambient
lighting and active ambient lighting effects
are not switched on
The warning support effects are fully active
only if the respective driving or driving safety
systems are switched on on the driving assis-
tance menu.
Ensure that the respective driving or
#
driving safety systems are switched on.
%
Observe the notes on driving systems and
your responsibility; you may otherwise fail to
recognise dangers (
Select Effects.
#
Activate the desired effect.
#
zones can be
%
Different effects will be available depending
on the vehicle equipment.
Operating feedback effects
Climate: If changes are made to the tempera-
R
ture setting in the vehicle, the colour of the
ambient lighting will change briefly.
Light and sight 227
page 312).
/
Advertisement
Table of Contents
