Mercedes-Benz EQE 2023 Operator's Manual page 485

At the desired starting point, select Ì
#
Start recording.
The track recording starts at this point.
During track recording, sectors can be set to sub-
divide the track.
Select ö Set sector.
#
To end track recording, select É
#
recording or cross the starting line again.
Confirm the prompt with Yes.
#
Select the weather.
#
%
The temperature is determined automatically.
Enter a name.
#
Press a to confirm.
#
The track is saved under the name you
entered.
Searching by track name
Select ª Search .
#
Enter the track name you want.
#
Tracks with the searched name are displayed.
Measuring the time on the saved track
Select ß All
#
Select the desired track.
#
Select u.
#
If you are already at the starting line, select
#
Start timing.
Stop
or
Navigate to
Select
#
starting line.
Timekeeping begins automatically when the start-
ing line has been crossed.
% Selecting ¨ enables you to switch to the
AR view of the track. Selecting ò also
allows you to switch to the telemetrics dis-
play.
To end the time recording, select ð
#
timing.
Confirm the prompt with OK.
#
Select the weather.
#
Select Yes to save the times recorded for this
#
track.
F295 0057 02
tracks.
to be navigated to the
End
MBUX multimedia system 483
Superimposing displays during Track Race
The following displays can be superimposed:
Tyre temperature
R
Miniature map
R
Sector overview
R
G-force display
R
Lap overview
R
Select ï Start timing .
#
Select à.
#
Drag the desired display from the grid to the
#
left or right edge of the central display.
The displays are shown during Track Race.
Selecting ¨ on the active display deactivates
it.
Displaying the analysis
Select ß All tracks.
#
An overview of all the driven tracks appears.
Select a track.
#