Table of Contents
Advertisement
642 Breakdown assistance
4MATIC vehicles
Make sure that the front and rear axles come
#
to rest on the same transportation vehicle.
* NOTE Damage to the drive train due to
incorrect positioning of the vehicle
Do not position the vehicle above the
#
connection point of the transport vehi-
cle.
Unload vehicle
Vehicles with AIRMATIC
Make sure that the vehicle is raised to trans-
#
port level before unloading.
Lower vehicle after unloading
Switch on the power supply.
#
Switch on the vehicle.
#
In the transportation settings, select
#
ard level
with an upward swiping gesture and
press a.
The vehicle is adjusted to the height of the last
active level and the display message
ing vehicle
is shown.
After the vehicle has lowered, press the button
#
G for at least two seconds.
The transportation settings are closed.
F295 0057 02
Towing eye storage location
Stand-
Lower-
Towing eye
1
is located under the boot floor.
Advertisement
Table of Contents
