Table of Contents
Advertisement
ror. You should test every position for at least
25 seconds before trying another position.
Press the button
6
on the remote control
#
again before transmission ends on remote
controls that transmit only for a limited period.
Angle the aerial line of the garage door opener
#
unit towards the remote control.
%
It is possible that older garage doors cannot
be operated using the remote control in the
inside rearview mirror even after you have
successfully performed the measures descri-
bed above. If this is the case, contact the
®
HomeLink
Hotline.
%
Support and additional programming informa-
tion:
®
with the HomeLink
Hotline on (0) 0800
R
046 635 465 or +49 (0) 7132 3455 733
(chargeable)
on the Internet at https://
R
www.homelink.com
▌Opening or closing the garage door
& WARNING Risk of injury by becoming
5
trapped when opening and closing a
garage door
When you operate or program a garage door
with an integrated garage door opener, per-
sons can become trapped or struck by the
garage door if they stand within its range of
movement.
Always make sure that nobody is within
#
the range of the garage door's move-
ment.
Before programming the garage door opener, park
the vehicle outside the garage. Make sure that the
vehicle is switched on but not started.
Requirements
The corresponding button is programmed to
R
operate the door.
%
The garage door opener function is always
available when the vehicle is switched on.
F295 0057 02
Driving and parking 307
Press and hold buttons 1,
#
door opens or closes.
If the indicator lamp
4
flashes yellow after
#
approx. 20 seconds: Press the previously
pressed button again and keep it pressed until
the door opens or closes.
2
or
3
until the
Advertisement
Table of Contents
