Table of Contents
Advertisement
Configuring the charging settings
Multimedia system:
©
EQ
Charging
4
5
5
Setting the charging programme
Select Home,
Work
or Standard.
#
You can watch an animation on this topic via the
following link:
Opening and closing the socket flap using the
MBUX multimedia system
Open socket flap
to open the socket flap.
#
The charging process can be interrupted using
#
Cancel
charging. The charging process is
ended and the charging cable is unlocked.
Press
Close socket flap
to close the socket
#
flap. The socket flap also closes automatically
when the transmission is shifted out of posi-
tion j. The socket flap also closes automati-
cally after one minute if it has been opened,
but no plug has been inserted, and ten to fif-
teen seconds after the plug has been
removed.
%
Closing the socket flap via the MBUX multime-
dia system is only available on vehicles with
an electric socket flap.
%
Further notes on charging with alternating
current: (
page 289) or direct current:
/
(
page 295).
/
Unlocking the charging cable (mode 3 or 4)
%
When the function is active, the charging
cable is unlocked when the maximum state of
charge is reached.
Select
Home
or Work.
#
Activate or deactivate
Unlock charging
#
Activating or deactivating location-based charging
Select
Charging program, home
#
program,
work.
Select based on loca-
Activate or deactivate
#
tion.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, the
charging program is automatically switched over
as soon as parking position j is engaged.
F295 0057 02
Activates or deactivates ECO charging
Activate or deactivate the function.
#
The
ECO charge
rent at charging stations to conserve the vehicle's
battery.
Switching the battery pretempering on or off
Select
Battery
#
Activate or deactivate the function.
#
When driving to a charging station the high-volt-
age battery is pretempered so that an optimum
charging capacity can be reached. In the central
cable.
display the active pretempering of the battery is
or
Charging
displayed with
when the temperature level is reached, when the
driver interrupts navigation guidance or when the
charging plug is inserted.
Driving and parking 301
function limits the charging cur-
pretempering.
. The display disappears
Advertisement
Table of Contents
