Emerson Rosemount OCX8800 Quick Start Manual page 9

July 2023
4. Ensure the conduits drop vertically from the transmitter and
the conduit is routed below the level of the conduit ports on
the housing to form a drip loop.
Drip loops minimize the possibility that moisture will damage
the electronics.
Figure 2-1: Installation with drip loops
5. Where a positive stack pressure exists at the installation site,
connect all pneumatic lines prior to installing the transmitter
in the stack or ductwork.
Quick Start Guide
A. Duct wall
B. Conduit drip loops
Quick Start Guide
9