Rational iCombi Pro Troubleshooting Manual page 48

Error tree: Change gas type
Service error: -
Unit type: iCombi
Note: Any change in the gas type of the unit must be reported to RATIONAL. To do this, please install the TechAssistant app.
In the Service Mode, select the Launcher Gas (flame symbol), tab: Gas
parameters. Under "Gas setting, set the new gas type (e.g. G20)
A dialogue opens in which the QR code is displayed
Start the TechAssistant app on your smartphone and go to "Options
Open the QR - code scanner by pressing the symbol in the top right
Enter the displayed password in the dialogue field (pay attention to
Service error: -
The gas type already set may only be changed by technicians who have participated in RATIONAL gas training.
Have the kitchen operator confirm the type of gas that you have.
Make sure that you are connected to the internet.
iCombi Pro
Management"
corner of the screen
Press "Request password"
uppercase and lowercase)
iCombi Classic
Switch on the unit
A symbol with 3 dashes appears on the screen under the current time
in the right corner of the display
Select this symbol by pressing the button on the right side of the
screen with your finger
3 icons and a "back arrow" button appear on the screen
Select the icon with the two gear wheels
Then select the icon with the "two overlapping squares"
On the next screen, select the icon with the "lock and spanner"
You will be asked to enter the service password. Use the control knob
for the input.
Enter the service password "TECLEVEL" and confirm the entry with
the green tick
Now select the icon with the "two overlapping squares" in the lower
left corner of the screen
Select "Basic Settings"
Copy all gas parameters (length CO
menu items CO2 screw steam, CO2 screw hot air 1, CO2 screw hot
air 2) (photo of the display)
1
screws CO values ​ ​ u nder the
2 2
V03 · 04/2021 · RTS/Awei · en-GB