Features - ATEN VM5404HA User Manual

VM5404HA / VM5808HA User Manual

Features

 Routes any of the 4 / 8 HDMI sources to any of the 4 / 8 HDMI displays
 Local HDMI output – enables previewing of up to 4 / 8 video sources in a
multi-view window
 Multiple system configuration methods – front panel pushbuttons,
RS-232 commands, Ethernet (Telnet / Web GUI) connection, ATEN Video
Matrix Control app, and ATEN Control System
 Device status can be viewed and controlled via ATEN Video Matrix
Control App
 Video Wall – allows for customization of up to 8 / 16 layouts for any type
of video walls via intuitive web console*
 Built-in scaler – automatically converts input resolutions for optimal
appearance on the display
 FrameSync – prevents image tearing by synchronizing the scaler output
frame rate to the input signal frame rate
 ATEN Seamless Switch technology* – adopts FPGA to unify video
formats so as to provide continuous video streams, real-time switching,
and stable signal transmission
 EDID Expert – selects optimum EDID settings for smooth power-up,
high-quality display, and use of the best resolution across different screens
 Audio enabled; HDMI audio can be extracted to stereo audio
 HDMI (3D, Deep color); HDCP 1.4
 Supports Dolby True HD and DTS HD Master audio
 Supports Consumer Electronics Control (CEC)
 ESD protection for HDMI
 Firmware upgradeable
 Rack mountable (1U design)
Note: 1. When Seamless Switch™ is enabled, mind the following: Video
output will not display 3D, Deep Color or interlace (i.e., 1080i)
resolutions correctly. To use these features, make sure to first
disable Seamless Switch™.
2. When Seamless Switch™ or Video Wall is enabled, videos may
not display within range. In this case, make sure to adjust the
display settings on your device.
3. For more information on the Video Matrix Control app, see video
Matrix Control App User Manual.
2