Telnet Operation; Configuration Menu; H - Call Up The Command List For Help; Gt - Set Gateway Address - ATEN VM5404HA User Manual

Telnet Operation

To connect to VM5404HA / VM5808HA via Telnet, follow the steps in
Connecting to the Matrix Switch via Telnet, page 83.

Configuration Menu

Once a Telnet connection to the VM5404HA / VM5808HA is established, the
device's text-based Configuration Menu comes up, with the following items:
1. H – Call up the command list for help
Command list:
GT – Set gateway address
IM – Set IP subnet mask
IP – Set IP address
LO – Load connections from profile nn
PW – Change password
RI– Read what input is connected to nn output
RO – Read what output is connected to nn input
SB – Set the serial port baud rate
SS – Switch input to specified port
SV – Save the current connections into profile nn
TI – Set timeout
VR – Software version information
Ctrl-Q – Quit
2. GT – Set gateway address
GT
Old gateway address: 192.168.0.1
New gateway address:
3. IM – Set IP subnet mask
IM
Old IP subnet mask: 255.255.255.0
Appendix
111