Device Overview - GARANT GRIDLINE 920801 User Manual

GARANT Ready-to-go workbench
de
 Not for use in areas where the floor is loose or unpaved.
 Do not overload the workbench, worktop, drawers or storage shelves.
 Do not make any unauthorised modifications.
bg
2.4. PERSONAL PROTECTIVE EQUIPMENT
Comply with the national and regional regulations for safety and accident prevention. Protective equipment such as safety
da
shoes and safety gloves appropriate for the risks associated with the intended activities must be selected, provided and
worn.
2.5. QUALIFICATIONS OF PERSONNEL
en
Specialists for mechanical work
Specialists in the sense of this documentation are persons who are familiar with assembly work, mechanical installation,
commissioning, troubleshooting and maintenance of the products and who possess the following qualifications:
fi
 Qualification / training in the field of mechanics as specified in the nationally applicable regulations.
Trained person
Trained persons in the sense of this documentation are persons who have been trained to perform work in the areas of
fr
transport, storage and operation.
2.6. DUTIES OF THE OPERATING COMPANY
Ensure that all the work listed below is performed only by qualified specialists:
it
 Transport and installation location
 Maintenance
hr
The operating company must ensure that personnel who work on the product comply with the regulations and provisions
together with the following instructions:
 National and regional regulations for safety, accident prevention and environmental protection regulations.
lt
 No damaged products are assembled, installed or commissioned.
 The necessary protective equipment is provided.
3.

Device overview

nl
3.1. READY-TO-GO WORKBENCH
A
no
Article no. 920801 – 921217
3.2. READY-TO-GO WORKBENCH WITH UNDERCARRIAGE
pl
B
Article no. 923611 – 923757
pt
3.3. READY-TO-GO WORKBENCH, MOBILE
C
Article no. 924011 – 924094
ro
1 Worktop
2 Full extension drawers
sv
3 Cupboard section with storage shelf
4 Storage shelves
sk
4. Transport and place of erection
i
sl Immediately on receipt check the product for damage in transport. If the product is damaged, do not install or commission
it.
CAUTION
es
Improper transport to the place of erection
The workbench has a high tare weight - risk of injury if lifted improperly.
» Wear foot protection and safety gloves.
cs
» Make sure the paths for movement and transport are clear.
» At least two persons must be employed to transport the workbench to the erection location.
hu
» Ensure during movement and transport that all drawers and cupboard doors are closed and locked.
18
5 Undercarriage
6 Fixed wheels
7 Castors
8 Parking brake