Web Server; Home; Settings; Output - Chauvet Professional STRIKE Array 4C User Manual

Web Server

The STRIKE Array 4C Web Server can be accessed by any computer on the same network as the
product. It allows network access to system information, settings such as control protocol and starting
address, color output testing, and the ability to change the Web Server password.
1. Connect the product to a Windows computer with a network cable.
2. On the computer, set the IP address of the new network to have the same first 3 digits as the IP
address of the product (See
3. Enter the IP address of the product into the URL bar of a web browser on the computer.
4. Enter both the User Name and Password as admin to log in.

Home

The Web Server Home page displays the details of all available control personalities and the technical
specifications for the STRIKE Array 4C.

Settings

The Web Server Settings page provides options for control. From the drop-down menus, the Protocol,
Universe, Start Address, IP Address, Ethernet to DMX, Personality, Dimmer Curve, Dimmer Mode, and
PWM Frequency can all be edited. Click Save Settings to send the new configuration to the product.

Output

On the Web Server Output page, an output test of the product's LEDs can be performed, by either editing
the values of each LED manually (by typing the number or moving the fader), or by selecting a sample
color. The page will show the current output color on the bottom left.

Security

The Web Server Security page gives the option to change the password to the connected product's web
server. Enter the old password (admin, by default) and the new password twice, then click Save Settings
to change the password.
22
IP Address).
Operation
STRIKE Array 4C User Manual Rev. 1