Table of Contents
Advertisement
MN004478A01-AN
Chapter 7: Advanced Features
6. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
7. Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8. Press and hold the PTT button to talk. Release the PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
Result:
If there is no voice activity for a preprogrammed period, the call ends.
If the call reaches the maximum ring time, the call ends.
7.4.2
Adding a New Contact Entry
Procedure:
1.
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2.
or
to [New Contact] and press the Menu Select button directly below Sel .
3.
or
to Name and press the Menu Select button directly below Edit.
The display shows Edit name and a blinking cursor appears.
4. Use the keypad to enter the name and press the Menu Select button directly below Ok once you
have entered the name.
To cancel this operation, press the Menu Select button directly below Cncl to return to the previous
screen.
5.
or
to [Add Number] and press the Menu Select button directly below Sel .
6.
or
to Number 1 and press the Menu Select button directly below Edit .
The display shows Edit Num 1 and a blinking cursor appears.
7. Use the keypad to enter the number and press the Menu Select button directly below Ok once you
have entered the number.
To cancel this operation, press the Menu Select button directly below Cncl to return to the previous
screen.
8. Perform one of the following actions per the information you need to add to current name:
●
or
to Type 1 and press the Menu Select button directly below Edit.
or
to the required mode and press the Menu Select button directly below Ok .
●
Repeat
step 6
●
Repeat
step 5
9. Press the Menu Select button directly below Done once you have finished.
The display shows <Entry> Stored, confirming that the contact entry has been added.
The radio returns to the main Contacts screen.
60
through
step 7
to enter or edit the existing system IDs.
through
step 7
to add a new number.
Advertisement
Table of Contents
