Table of Contents
Advertisement
MN004478A01-AN
Chapter 7: Advanced Features
7.22.9
Editing the Coordinates of a Waypoint
When and where to use:
NOTE: You can only edit preprogrammed coordinates of Home and Destination.
Ensure that your radio shows the current location on the screen.
Procedure:
1. Press the Menu Select button directly below Optn.
2.
or
to Waypoints and press the Menu Select button directly below Sel.
The display shows a list of waypoints.
3. Perform one of the following actions:
●
or
to [Home] and press the Menu Select button directly below Optn.
●
or
to [Destination] and press the Menu Select button directly below Optn.
4.
or
to Edit location and press the Menu Select button directly below Sel.
The first number blinks.
5. Utilize the following control buttons to select the number/coordinates if required, then press the Menu
Select button directly below Edit to change the number/coordinates.
●
Press to move to the previous number/coordinates.
●
Press to move to the next number/coordinates.
A blinking cursor appears in the Edit Location screen.
6. Utilize the following control buttons or menu to change the number/coordinates if required then press
the Menu Select button directly below Ok once.
●
Press to move one space to the left.
●
Press to move one space to the right.
●
Press the Menu Select button directly below Del to delete any unwanted characters.
●
Press the Menu Select button directly below Cncl to return to the previous screen
7. Press the Menu Select button directly below Ok once complete setting up the new Home or
Destination.
One of the following scenarios occurs:
●
The display shows [Home] Updated and the radio returns to the Waypoints main screen.
●
The display shows [Destination] Updated and the radio returns to the Waypoints main
screen.
7.22.10
Deleting a Single Saved Waypoint
Prerequisites: Ensure your radio shows the current location on the screen.
110
Advertisement
Table of Contents
