Table of Contents
Advertisement
9. Press BACK to return to FPP main menu.
10. Press
to return to the Home screen.
7.30.19.5
Editing Parameters
When and where to use: Use the keypad to enter the numeric digits. Each key can generate different
characters of the alphabet through multiple presses of the same key. For all parameters except Chan Name,
Zone Name, Top Chan Name and Top Zone Name the or buttons increment or decrement the selected
value by scrolling through the valid entries.
Procedure:
Perform the following actions based on the type of the parameter:
Table 8: Parameter Editing Keys
Parameter
Editing Keys
Tx
Perform one of the following:
Rx
●
●
Tx PL
Perform one of the following:
Rx PL
●
Tx DPL
●
Rx DPL
DEL to delete the parameter value of PL entered.
In addition, for Tx DPL and Rx DPL, the INVT softkey switches INVERT on and off.
Tx NAC
or to increment or decrement entry and to move cursor within parameter value.
Rx NAC
Use keypad to enter hexadecimal numbers:
●
●
Rx Type
Perform one of the following:
●
●
Tx Type
Bandwidth
Protect
Tx Deviation
Power Level
Hot Keypad
Busy LED
or to increment entry and to move cursor.
Use keypad to directly enter the desired value.
or to increment entry and to move cursor.
Use keypad to directly enter the desired value.
Plus, multiple press 2 to scroll through A, B, C, 2.
Plus, multiple press 3 to scroll through D, E, F, 3.
or
to toggle between valid entries.
Press the keypad digits for quick access to locations in the list.
MN004478A01-AN
Chapter 7: Advanced Features
Value
ANALOG/
DIGITAL/
MIXED
ANALOG/
DIGITAL
25kHz/20kHz/
12.5kHz
ON/OFF
5.0 kHz/4.0
kHz/2.5 kHz
High/Low
ON/OFF
ON/OFF
145
Advertisement
Table of Contents
