Making A Selective Call - Motorola APX 4500Li User Manual

NOTICE:
If you press PTT button before pressing the
Menu Select button directly below Call, your
conversation is heard by all members of the
talk group.
If 20 seconds pass before you press the
Menu Select button directly below the Call,
you are not responding privately to the call
just received. Instead, you initiate a Selective
Call. See Making a Selective Call on page
79.

Making a Selective Call

Your radio must be preprogrammed for you to use this
feature.
1 Perform one of the following actions:
• To access this feature by using a preprogrammed
button, press the preprogrammed Quick Access
(One-Touch) Selective Call button to dial the
preprogrammed ID. Proceed to
• or to Call, and press the Menu Select button
directly below Call.
2 To select the required ID, perform one of the
3 Hold the microphone vertically 1 to 2 inches (2.5 to
4 Press and hold the PTT button to start the Selective
5 Release the PTT button to listen.
6 Press
step 3.
The display shows the last transmitted or
received ID.
following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required ID.
• or to the required ID.
• Use the keypad to enter the required ID.
5.0 cm) from your mouth.
Call.
The display shows the ID of the target radio.
to return to the Home screen.
If you do not press button to hang up, your radio
remains in Selective Call state with the other unit.
English
79