Editing Parameters; Table 7: Parameter Editing Keys - Motorola APX 2000 User Manual

7.29.18.5

Editing Parameters

When and where to use: Use the keypad to enter the numeric digits. Each key can generate different
characters of the alphabet through multiple presses of the same key. For all parameters except
Chan Name, Zone Name, Top Chan Name and Top Zone Name the
decrement the selected value by scrolling through the valid entries.
Procedure:
1 Perform the following actions based on the type of the parameter:

Table 7: Parameter Editing Keys

Parameter Editing Keys
Tx Perform one of the following:
Rx
•
•
Tx PL Perform one of the following:
Rx PL
•
Tx DPL
•
Rx DPL
DEL to delete the parameter value of PL entered.
In addition, for Tx DPL and Rx DPL, the INVT softkey switches INVERT on
and off.
Tx NAC
value.
Rx NAC
Use keypad to enter hexadecimal numbers:
•
•
Rx Type Perform one of the following:
•
•
Tx Type
Bandwidth
Protect
Tx Deviation
Power Level
Hot Keypad
Busy LED
Low Batt
LED
or to increment entry and to move cursor.
Use keypad to directly enter the desired value.
or to increment entry and to move cursor.
Use keypad to directly enter the desired value.
or to increment or decrement entry and to move cursor within parameter
Plus, multiple press 2 to scroll through A, B, C, 2.
Plus, multiple press 3 to scroll through D, E, F, 3.
or to toggle between valid entries.
Press the keypad digits for quick access to locations in
the list.
68012005014-HV
Chapter 7 : Advanced Features
or buttons increment or
Value
ANALOG/
DIGITAL/
MIXED
ANALOG/
DIGITAL
25kHz/
20kHz/
12.5kHz
ON/OFF
5.0 kHz/4.0
kHz/2.5 kHz
High/Low
ON/OFF
ON/OFF
ON/OFF
139