Setting The Core Temperature - Siemens CS856GD 6S Series Instruction Manual

Poultry: Insert the meat probe as far as it will go into
the thickest point in the breast. Insert the meat probe
into the poultry crossways or lengthways depending on
its structure. Then turn the poultry and place it on the
wire rack breast-side down.
Fish: Insert the meat probe behind the head as far as it
will go towards the spine. Place the whole fish onto the
wire rack and prop it up in the swimming position using
half a potato.
Turning the food: If you wish to turn the food, do not
remove the meat probe. Once you have turned the
food, check that the meat probe is correctly positioned
in the food.
If you remove the meat probe while the food is cooking,
all settings will be reset and you will have to apply them
again.
Caution!
Ensure that the meat probe's cable does not become
trapped.
To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few
centimetres between the grill element and the meat
probe. The meat may expand during the cooking
process.

Setting the core temperature

Types of heating
Switch on the appliance.
1.
Insert the meat thermometer in the socket on the left-
2.
hand side of the cooking compartment.
Use the rotary selector to select the type of heating.
3.
Touch the suggested temperature and set the
4.
temperature using the rotary selector.
Touch the "Core temperature" field and set the core
5.
temperature using the rotary selector.
If necessary, touch the "Added steam" field and set
6.
the steam intensity using the rotary selector.
Press the Start/Stop button to start.
7.
The progress line shows the core temperature as it
rises.
Steaming
Switch on the appliance.
1.
Insert the meat thermometer in the socket on the left-
2.
hand side of the cooking compartment.
Press the menu button.
3.
Touch the "Steaming" field and set the type of
4.
heating using the rotary selector.
Touch the "Core temperature" field and set the core
5.
temperature using the rotary selector.
Press the Start/Stop button to start.
6.
The progress line shows the core temperature as it
rises.
Dishes
Switch on the appliance.
1.
Insert the meat thermometer in the socket on the left-
2.
hand side of the cooking compartment.
Press the menu button.
3.
Touch the "Dishes" field.
4.
Use the rotary selector and the "Next" field to select
5.
the required food.
If necessary, touch the "Adjust" filed and adjust the
6.
settings using the rotary selector.
Press the Start/Stop button to start.
7.
The progress line shows the core temperature as it
rises.
Once the set core temperature in the food has been
reached
An audible signal sounds. The oven stops heating. You
can unplug the meat thermometer from the socket. The
. symbol goes out.
Changing the core temperature
You can change the core temperature at any time.
Cancelling
Unplug the meat thermometer from the socket.
:
Warning – Risk of burns!
The cooking interior and the core temperature probe
become very hot. Use oven mitts to plug and unplug the
core temperature probe.
:
Warning – Risk of electric shock!
The insulation of an incompatible meat probe may be
damaged. Only use the meat probe which is
recommended for this appliance.
Meat thermometer
en
27