Table of Contents
Advertisement
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After connecting the appliance to the mains or after a power
cut, the
symbol and three zeros flash in the display. Set the
0
clock.
Press the
button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the
N
arrow is next to
Use the
or
button to set the clock.
@
A
2.
After a few seconds, the time that has been set is adopted.
Meat thermometer
The meat thermometer makes accurate roasting possible. It
measures the temperature inside the meat, and has a range of
30 °C to 99 °C.
Use only the meat thermometer supplied. You can purchase it
as a spare part from the after-sales service.
After use, always remove the meat thermometer from the
cooking compartment. Never store it inside the cooking
compartment.
Suitable types of heating
3D hot air
:
Top/bottom heating
%
Pizza setting
;
Hot air grilling
4
Cooking compartment temperature
To prevent damage to the meat thermometer, do not set
temperatures higher than 250 °C.
The cooking compartment temperature set must be at least
10 °C higher than the core temperature set.
Inserting the meat thermometer
Before placing the piece of meat in the cooking compartment,
insert the meat thermometer into the meat.
Insert the metal spike into the thickest part of the piece of meat.
Make sure that the end of the spike is roughly in the middle of
the piece of meat. It must not be in the fat or be touching the
ovenware or bones.
Always place the meat in the centre of the wire rack.
To prevent the meat thermometer from being damaged by too
high a heat, there must be sufficient distance between the grill
heating element and the meat thermometer.
12
arrow.
N
cooking time,
end time or
y
arrow is next
N
0
.
Changing the clock
No other time-setting option should have been set.
Press the
button four times.
0
1.
The time symbols light up in the display and the
0
next to
0
.
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Setting the core temperature
Once you have placed the meat with the meat thermometer into
the cooking compartment, set the core temperature.
Plug the meat thermometer into the socket at the front left of
1.
the cooking compartment and then close the oven door.
Make sure that the meat thermometer cable is not trapped.
80 °C appears in the display as a default value. The
is next to the
Adjust the core temperature using button
2.
The function selector is used to set the type of heating.
3.
Use the temperature selector to set the temperature.
4.
To prevent damage to the meat thermometer, do not set
temperatures higher than 250 °C.
The oven will start up after a few seconds. The set core
temperature is displayed until the core temperature has
reached 30 °C. From 30 °C onwards, the display shows the
current core temperature. To indicate the difference, the upper
dot in the colon lights up for the current core temperature.
Once the set core temperature has been reached
A signal sounds. The oven stops heating. The display shows
the set core temperature without the dot.
If you wish to increase the core temperature again, press the
button repeatedly until the
symbol again. Press the button
temperature.
To switch off the oven, press the
selector to the off position. The oven switches off. Unplug the
meat thermometer from the socket.
:
Risk of burns!
The meat thermometer and the cooking compartment are hot.
Use oven gloves to take the ovenware out of the oven.
Changing the core temperature
As long as the core temperature has not reached 30 °C, you
can change the core temperature by using button
a few seconds, the change is adopted.
Once the core temperature has reached 30 °C and the current
temperature is displayed, or if the timer is set, first press the
button twice.
button to change the clock.
A
,
symbol.
arrow appears in front of the
N
or
to set a new core
@
A
button and turn the function
0
arrow is
N
arrow
N
or
.
@
A
0
,
or
. After
@
A
0
Advertisement
Table of Contents
