Inserting The Meat Probe Into The Food; Setting The Core Temperature; Core Temperatures Of Different Foods - Siemens CM678G4 6B Series Instruction Manual

Table of Contents

Advertisement

en
Meat thermometer

Inserting the meat probe into the food

Before placing your food into the cooking compartment,
insert the meat probe into the food.
The meat probe has three measuring points. Ensure
that the middle measuring point is inserted in the food.
Caution!
When you turn the microwave on, the tip of the meat
probe must be inserted in the food.
Meat: For large pieces of meat, insert the meat probe at
an angle from above as far as it will go into the meat.
For relatively thin pieces of meat, insert the meat probe
from the side at the thickest point.
Poultry: Insert the meat probe as far as it will go into
the thickest point in the breast. Insert the meat probe
into the poultry crossways or lengthways depending on
its structure. Then turn the poultry and place it on the
wire rack breast-side down.
Turning the food: If you wish to turn the food, do not
remove the meat probe. Once you have turned the
food, check that the meat probe is correctly positioned
in the food.
If you remove the meat probe while the food is cooking,
all settings will be reset and you will have to apply them
again.
Caution!
Ensure that the meat probe's cable does not become
trapped.
To prevent the meat probe from being damaged by
excessive heat, there must be a gap of a few
centimetres between the grill element and the meat
probe. The meat may expand during the cooking
process.
22

Setting the core temperature

Insert the meat thermometer in the socket on the left-
1.
hand side of the cooking compartment.
Use the rotary selector to select the type of heating
2.
or the "Dishes" operating mode.
Touch the default temperature and set the
3.
temperature using the rotary selector.
Touch the "Core temperature" field and set the core
4.
temperature using the rotary selector.
You can switch on the microwave or steam function
as required.
Press the Start/Stop button to start.
5.
The progress line shows the core temperature as it
rises.
Once the set core temperature in the food has been
reached
An audible signal sounds. The oven stops heating. You
can unplug the meat thermometer from the socket. The
.
symbol goes out.
Changing the core temperature
You can change the core temperature at any time.
Cancelling
Unplug the meat thermometer from the socket.
:
Warning – Risk of burns!
The cooking interior and the core temperature probe
become very hot. Use oven mitts to plug and unplug the
core temperature probe.
:
Warning – Risk of electric shock!
The insulation of an incompatible meat probe may be
damaged. Only use the meat probe which is
recommended for this appliance.

Core temperatures of different foods

Do not use frozen food. The figures in the table are
given as a guide. They depend on the quality and
composition of the food.
You can find comprehensive information on the heating
mode and temperature at the end of the instruction
manual. ~ "Tested for you in our cooking studio"
on page 35
Food
Poultry
Pork
Beef, rare
Beef, medium
Beef, well done
Lamb
Other: Heating/reheating food
Core temperature in
°C
75
75
50
60
70
70
65-75

Advertisement

Table of Contents
loading

Table of Contents