Precautions When Mounting The Indoor Unit; To Install The Indoor Unit - Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual

7.3.2 Precautions when mounting the indoor unit

7.3.3 To install the indoor unit

EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
"2 General safety
▪
"7.1 Preparing the installation
1 Lift the indoor unit from the pallet and place it on the floor. See
handle the indoor unit" [
2 Connect the drain hose to the drain. See
4
the drain" [ 70].
3 Slide the unit into position.
4 Adjust the height of the 4 levelling feet of the outer frame to compensate for
floor irregularities. The maximum allowed deviation is 1°.
NOTICE
Do NOT tilt the unit forwards:
0°
NOTICE
To avoid structural damage on unit, ONLY move the unit when levelling feet are at
their lowest position.
NOTICE
For optimum sound reduction, carefully check if there is no gap between the bottom
frame and the floor.
4
precautions" [ 10]
4
site" [ 60]
4
22].
"7.3.4 To connect the drain hose to
≤1°
1° 1°
7 Unit installation
|
"4.2.3 To
Installer reference guide
69