Configuring The Adapter For App Control; Configuring The Adapter For The Smart Grid Application; Updating Software - Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual

10.4.2 Configuring the adapter for app control

10.4.3 Configuring the adapter for the Smart Grid application

10.4.4 Updating software

To update adapter software
EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04
When the LAN adapter is used for app control (only), there is hardly any
configuration required. After correct installation and system start-up, all system
components (LAN adapter, router, and ONECTA app) should be able to find each
other automatically by way of their IP address.
If the system components fail to connect to each other automatically, you can
connect them to each other manually by making use of a fixed IP address. In this
case, provide LAN adapter, router, and ONECTA app with the same fixed IP
address. For how to provide the LAN adapter with a fixed IP address, see
"10.4.8 Network settings" [
When the LAN adapter is used for the Smart Grid application, configure the LAN
adapter on the dedicated configuration web interface.
▪ For instructions on how to access the configuration web interface, see
"10.4.5 Configuration web
▪ For an overview of Smart Grid settings, see
▪ For more information on the Smart Grid application, see
4
application" [ 129].
If required, perform a software update. For instructions, see
4
software" [ 123].
INFORMATION
For a good understanding of the Smart Grid application, and to be able to properly
configure the LAN adapter, it is recommended to first read up on the Smart Grid
application in "10.5 Smart Grid
To update LAN adapter software, use the ONECTA app.
INFORMATION
▪
To update LAN adapter software with the ONECTA app, you need a router. In case
the LAN adapter is only used for the Smart Grid application (and a router is not
part of the system), temporarily add a router to the setup according to
control + Smart Grid
▪
The ONECTA app will automatically check the LAN adapter software version and
ask for an update, if required.
INFORMATION
For the indoor unit and user interface to function with the LAN adapter, it is required
that their software meets requirements. ALWAYS make sure the unit and user
interface have the latest software version. For more information, see
my.daikin.eu/denv/en_US/home/applications/software-finder/service-software/unit-
software/heating/MMI-software-daikin-altherma-LT.html.
Prerequisite: A router is (temporarily) part of the layout, you have a smartphone
with the ONECTA app, and the app notified you that new LAN adapter software is
available.
4
127].
4
interface" [ 124].
"10.5.1 Smart Grid
4
application" [ 129].
application" [ 4 112].
10 LAN adapter
|
4
settings" [ 131].
"10.5 Smart Grid
"10.4.4 Updating
"App
https://
Installer reference guide
123