To Access The Most Used Commands - Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual

11.1.1 To access the most used commands

EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04
INFORMATION
When the configuration wizard is finished, the user interface will show an overview
screen and request to confirm. When confirmed, the system will restart and the
home screen will be displayed.
Accessing settings – Legend for tables
You can access the installer settings using two different methods. However, NOT all
settings are accessible via both methods. If so, the corresponding table columns in
this chapter are set to N/A (not applicable).
Accessing settings via the breadcrumb in the home
menu screen or the menu structure. To enable
breadcrumbs, press the button in the home screen.
Accessing settings via the code in the overview field
settings.
See also:
▪ "To access the installer
▪ "11.7 Menu structure: Overview installer
To change the user permission level
You can change the user permission level as follows:
1 Go to [B]: User profile.
B
User profile
2 Enter the applicable pin code for the user permission level.
▪ Browse through the list of digits and change the selected digit.
▪ Move the cursor from left to right.
▪ Confirm the pin code and proceed.
Installer pin code
The Installer pin code is 5678. Additional menu items and installer settings are
now available.
Installer
5678
Advanced user pin code
The Advanced user pin code is 1234. Additional menu items for the user are
now visible.
Method
settings" [ 4 140]
settings" [
11 Configuration
|
Column in tables
#
For example: [2.9]
Code
For example: [C-07]
4
212]
—
Installer reference guide
139