To Close The Indoor Unit; Mounting The Indoor Unit; About Mounting The Indoor Unit - Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual

7 | Unit installation

7.2.4 To close the indoor unit

7.3 Mounting the indoor unit

7.3.1 About mounting the indoor unit

Installer reference guide
68
a
b
a Water drain valve
b Central water loop drain valve
NOTICE
Ensure that no water can enter the switch box of the hydro module.
5 Perform the remaining steps as described in
module from the unit" [
1 If applicable, reinstall the left side panel.
2 If applicable, reinsert the hydro module.
3 If applicable, close the cover of the main switch box and reinstall the front
panel.
4 Close the cover of the installer switch box.
5 Reconnect the cables to the user interface panel.
6 Reinstall the user interface panel.
7 Reinstall the top panel.
NOTICE
When closing the indoor unit cover, make sure that the tightening torque does NOT
exceed 4.1 N•m.
When
Mount the indoor unit before you connect the central water loop piping and the
water piping.
4
65].
"7.2.3 To remove the hydro
EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04