Configuration Web Interface - Daikin Altherma 3 WS EWSAH06UD 9W Series Installer's Reference Manual

10 | LAN adapter

10.4.5 Configuration web interface

Accessing the configuration web interface
Access via URL
Access via LAN adapter IP address
Installer reference guide
124
1 Follow the update procedure in the app.
Result: The new software is automatically downloaded to the LAN adapter.
Result: To implement changes, the LAN adapter automatically performs a
power reset.
Result: The LAN adapter software is now updated to the latest version.
INFORMATION
During the software update, the LAN adapter and the app CANNOT be operated. It is
possible that the user interface of the indoor unit displays error U8-01. When the
update is finished, this error code will disappear automatically.
On the configuration web interface you can make the following settings:
Section
Information
Upload adapter SW
Factory reset
Network settings
Smart Grid
INFORMATION
The configuration web interface is available for 2 hours after powering on the LAN
adapter. To make the configuration web interface available again after it has expired,
the LAN adapter requires a power reset (power reset of the indoor unit). It is NOT
required to reset the 230 V AC detection voltage.
Normally, you should be able to access the configuration web interface by
browsing to its URL: http://altherma.local. If this does not work out, navigate to the
configuration web interface by using the LAN adapter's IP address. The IP address
depends on network configuration.
Prerequisite: Your computer is connected to the same router (same network) the
LAN adapter is connected to.
Prerequisite: The router supports DHCP.
1 In your browser, go to
Prerequisite: Your computer is connected to the same router (same network) the
LAN adapter is connected to.
Prerequisite: You have retrieved the IP address of the LAN adapter.
1 In your browser, go to the IP address of the LAN adapter.
To retrieve the IP address of the LAN adapter:
Consult various system parameters
Perform a LAN adapter software update
Perform a LAN adapter factory reset
Make various network settings (e.g. set
a fixed IP address)
Make settings related to the Smart Grid
application
http://altherma.local
Settings
EWSAH/X06UD
Daikin Altherma 3 WS
4P675765-1 – 2022.04