Subscribe to Our Youtube Channel
Related Manuals for Ruijie HA3515-DG
Summary of Contents for Ruijie HA3515-DG
- Page 1 HA3515-DG Access Point Hardware Installation and Reference Guide Document Version: V1.0 Date: 2023.12.07 Copyright © 2023 Ruijie Networks...
- Page 2 Due to product version upgrades or other reasons, the content of this document will be updated from time to time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.
-
Page 3: Preface
Preface Intended Audience This document is intended for: Network engineers Technical support and servicing engineers Network administrators Technical Support Ruijie Networks Website: https://www.ruijienetworks.com/ Technical Support Website: https://ruijienetworks.com/support Case Portal: http://caseportal.ruijienetworks.com Community: http://community.ruijienetworks.com Technical Support Email: service_rj@ruijienetworks.com... -
Page 4: Table Of Contents
Contents Preface ..............................I 1 Product Overview ..........................1 1.1 Technical Specifications ......................1 1.2 LEDs and Buttons ........................2 1.2.1 LEDs ........................... 2 1.2.2 Buttons ........................4 1.3 Power Supply ........................... 4 1.4 Heat Dissipation ........................5 2 Preparing for Installation ........................ 6 2.1 Safety Precautions ........................ - Page 5 7 Appendix ............................20 7.1 Connectors and Media ......................20 7.2 Packing List..........................22 7.3 Power Adapter ........................23...
-
Page 6: Product Overview
Product Overview Product Overview HA3515-DG access point adopts the latest standard 802.11ax standard and is backward compatible. It can work in both 802.11ax and 802.11a/b/g/n/ac and supports Cat5e cables, 2 radio modules, dual bands of 2.4GHz and 5GHz. It provides up to 1.775 Gbps wireless throughput, meeting need of high-performance access. -
Page 7: 1.2 Leds And Buttons
Hardware Installation and Reference Guide Product Overview Power Consumption ＜15W Operating Temperature 0°C to 40°C Storage Temperature -40°C to 70°C Operating Humidity 5% to 95% RH（Non-condensing） Storage Humidity 5% to 95%RH（Non-condensing） Installation Desktop/Wall-mounted Certification VCCI-B, TELEC, JATE The weight refers to the total weight of the host and the rack. 1.2 LEDs and Buttons 1.2.1 LEDs State... - Page 8 Solid yellow green Mesh is formed. The Internet LED of HA3515-DG keeps off when it is set to a child node in mesh networking. If the Internet LED of the HS2310-16GH2GT1XS and the Mesh LED of HA3515-DG keep on, it means that...
-
Page 9: Buttons
Used to connect to a telephone. G.hn/LINE Port Wired uplink port with up to 1.7Gbps. Wired downlink port LAN1 and LAN2 Ports Support 10BASE-T/100BASE-TX/1000BASE-T adaptation 1.3 Power Supply HA3515-DG supports 12V DC power supply (including PSE approved adapter). The supplied adapter is recommended. -
Page 10: Heat Dissipation
Hardware Installation and Reference Guide Product Overview Heat Dissipation HA3515-DG adopts fanless design. Maintain an enough space around the device to allow air circulation. -
Page 11: Preparing For Installation
Hardware Installation and Reference Guide Preparing for Installation Preparing for Installation Safety Precautions To avoid personal injury and device damage, carefully read the safety precautions before you install the device. The following safety precautions may not cover all possible dangers. General Safety Precautions Do not expose the AP to high temperature, dusts, or harmful gases. -
Page 12: Installation Site Requirements
Keep the device at least 2m away from the base station antenna, to ensure that no interference is generated. Ventilation Requirements 2.5.2 HA3515-DG adopts a fanless design. Reserve sufficient space around the device to ensure normal heat dissipation. Temperature/Humidity Requirements 2.5.3 To ensure the normal operation and prolonged service life of the device, maintain an appropriate temperature and humidity in the equipment room. -
Page 13: Cleanliness Requirements
In an environment with high temperature, the equipment is subject to even greater harm, as its performance may degrade significantly and various hardware faults may occur. Therefore, the ambient temperature and humidity of the HA3515-DG must meet the requirements listed in Table 2-1: Table 2-1 Requirements for Temperature and Humidity... -
Page 14: Emi
Hardware Installation and Reference Guide Preparing for Installation 2.5.5 The grounding device of the switch must not be used as the grounding device of the electrical equipment or anti-lightning grounding device. In addition, the grounding device of the switch must be deployed far away from the grounding device of the electrical equipment and anti-lightning grounding device. -
Page 15: Installing The Access Point
Hardware Installation and Reference Guide Installing the Access Point Installing the Access Point The HA3515-DG must be fixed and installed indoors. Before installing the device, make sure you have carefully read the requirements described in Chapter 2. Installation Flowchart Take out the AP... - Page 16 Hardware Installation and Reference Guide Installing the Access Point Do not subject the device to high temperatures. Keep away from high voltage cables. Install the device indoors. Do not expose the device in a thunderstorm or strong electric field. ...
-
Page 17: Installing The Access Point
Hardware Installation and Reference Guide Installing the Access Point Installing the Access Point Desktop 3.4.1 Align the hole at the bottom of the AP with the hooks on the stand base. Follow the direction shown above to install the AP, and ensure that it clicks into place. -
Page 18: Wall Mounting
Hardware Installation and Reference Guide Installing the Access Point Wall Mounting 3.4.2 Align the holes on the rear of the AP with the hooks of the wall mounting bracket. Follow the direction shown above to install the AP, and ensure that it clicks into place. Anti-theft Instructions... -
Page 19: Connection Instructions
Hardware Installation and Reference Guide Installing the Access Point The device is equipped with anti-theft holes, and the anti-theft method is the same as that of a laptop. The following figure is provided for reference. Connection Instructions Connect to the main telephone line unit HS2310-16GH2GT1XS Connect the G.hn/LINE port on the AP to the G.hn port on the switch with a telephone line and ... -
Page 20: Checking After Installation
Hardware Installation and Reference Guide Installing the Access Point Login Local login: The AP can be managed via the Web-GUI. Management IP: 192.168.110.1; Domain name: https://rjap.jp Connect to Wi-Fi Enter the 192.168.110.1 or https://rjap.jp in the address bar of a browser of a wireless terminals, ... -
Page 21: Verifying Operating Status
Hardware Installation and Reference Guide Installing the Access Point Verifying Operating Status Setting up the Environment Power the AP up by using a power adapter. Verify that the AP is properly connected to the power source and compliant with safety requirement. ... -
Page 22: Monitoring And Maintenance
Hardware Installation and Reference Guide Installing the Access Point Monitoring and Maintenance Monitoring You can observe the LED to monitor the status of AP. Hardware Maintenance If the hardware is faulty, please contact our Technical Assistance Center (TAC) for help. -
Page 23: Troubleshooting
Hardware Installation and Reference Guide Installing the Access Point Troubleshooting Troubleshooting Flowchart Troubleshooting LED does not light up after the AP is powered on When a power adapter is used, verify that the power adapter is connected to an active power outlet, and then verify that the power adapter works properly. - Page 24 Hardware Installation and Reference Guide Installing the Access Point (1) Verify that the device is properly powered. (2) Verify that the Ethernet port is correctly connected. (3) Verify that the AP is correctly configured. (4) Move the client device to adjust the distance between the client and the AP. Internet LED keeps off ...
-
Page 25: Appendix
Hardware Installation and Reference Guide Appendix Appendix Connectors and Media 1000BASE-T/100BASE-TX/10BASE-T The 1000BASE-T/100BASE-TX/10BASE-T is a 10/100/1000 Mbps auto-negotiation port that supports auto MDI/MDIX. Compliant with IEEE 802.3ab, 1000BASE-T requires Category 5e 100-ohm UTP or STP (STP is recommended) with a maximum distance of 100 meters (328 feet). 1000BASE-T requires all four pairs of wires be connected for data transmission, as shown in Figure 7-1. - Page 26 Hardware Installation and Reference Guide Appendix Figure 7-3 100BASE-TX/10BASE-T Connection...
-
Page 27: Packing List
Hardware Installation and Reference Guide Appendix Packing List Items Quantity Power Cable Power Adapter 1m Telephone Line Product Manual Expansion Screws Mounting Bracket (for desktop and wall mounting) -
Page 28: Power Adapter
Hardware Installation and Reference Guide Appendix Power Adapter Input voltage: 90~264VAC; Rated current: 0.7 A Output voltage: 12V; Rated current: 2A Technical Specifications of the DC Adapter Inner Diameter Outer Diameter Depth Polarity Inner pole: positive 2.1 mm (0.08 in.) 5.5 mm (0.22 in.) 9.5 mm (0.37 in.) Outer pole: negative...
Need help?
Do you have a question about the HA3515-DG and is the answer not in the manual?
Questions and answers