Body Solid GMR10B Assembly Instructions & Owner's Manual page 6

S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of STEP 2B. Some components may be
pre-assembled. Nylon lock nuts will not fully screw onto bolts, they must be wrench
A. Attach Ball Holders (D) to Main Frame Assembly (A) using:
Twelve 4 (M8x60 Hex Head Bolt)
Twenty-four 6 (M8 Washer)
Twelve 8 (M8 Nylon Lock Nut)
6