Fayat Group BOMAG BF 700 C S500 Service Manual page 25

Taking into operation
After taking into operation
General – Repair notes for hydraulics
n
Bleed the hydraulic circuits.
n
Start up the hydraulic system without load.
n
Check the hydraulic oil level in the tank, if necessary top up
with hydraulic oil as specified in the operating and maintenance
instructions or drain oil off into a suitable container.
n
Check fittings and flanges for leaks.
n
After each repair check all adjustment data, system pressures,
rotational speeds and nominal values in the hydraulic system,
adjust if necessary.
n
Do not adjust pressure relief valves and control valves to
values above their specified values.
BF 700 C S500 25