Fayat Group BOMAG BF 700 C S500 Service Manual page 18

General – Fuels and lubricants
1.3.3.2 Low outside temperatures
1.3.3.3 Storage
18
NOTICE!
Damage to the exhaust gas aftertreatment
system!
Filling the AdBlue
or other operating media or fuels, mixing in addi-
tives or diluting AdBlue
exhaust gas aftertreatment system.
Use only AdBlue
22241.
In case of incorrect filling you should contact a
qualified expert workshop.
If AdBlue ® /DEF comes into contact with spray
painted or aluminium surfaces, you should rinse off
the affected areas immediately with lots of water.
AdBlue /DEF freezes at a temperature of approx. -11 °C (12 °F).
®
Winter operation is also guaranteed at temperatures below -11 °C
(12 °F).
At low temperatures crystals may form on the wound hose
between engine and exhaust silencer. Such crystallization does not
impair the function of the exhaust gas aftertreatment. If necessary
just remove the crystals with clear water.
Use only tanks made of the following material to store AdBlue
DEF:
n
Cr-Ni steels acc. to DIN EN 10 088-1/2/3
n
Mo-Cr-Ni steels acc. to DIN EN 10 088-1/2/3
n
Polypropylene
n
Polyethylene
BF 700 C S500
® /DEF tank with cleaning agent
® /DEF will damage the
/DEF as per DIN 70070/ISO
®
® /