The Base Model Soho 6; Registering Your Soho 6 And Activating The Livesecurity Service - Watchguard Firebox SOHO 6 User Manual

Registering Your SOHO 6 and Activating the LiveSecurity Service

6 Connect the power supply.
The PWR indicator is on and the reset is complete.

The base model SOHO 6

The base model SOHO 6 includes a ten-seat license. This license
allows a maximum of ten computers on the trusted network to
connect to the Internet at the same time. There can be more than
ten computers on the trusted network, but the SOHO 6 will only
allow ten Internet connections. See "Cabling the SOHO 6 for more
than four appliances" on page 20 for additional information.
Registering Your SOHO 6 and Activating the
LiveSecurity Service
After the SOHO 6 is installed and configured, register the SOHO 6
and activate your LiveSecurity Service subscription. LiveSecurity
Service provides threat alert notifications, security advice, free
virus protection, software updates, technical support by Web or
telephone, and access to online help resources and the
WatchGuard user forum. A subscription to the LiveSecurity
Service is required to get the license keys for the upgrades that you
purchase.
You must have the serial number of your SOHO 6 to register. The
SOHO 6 serial number is located on the bottom of the appliance.
Record the serial number in the table below:
Serial Number:
Register your SOHO 6 with the LiveSecurity Service at the
WatchGuard Web site:
http://www.watchguard.com/activate
User Guide 27