Watchguard Firebox SOHO 6 User Manual page 44

Chapter 2: Installation
4 Connect an Ethernet cable between each of the computers and
an uplink port on the Ethernet hub.
5 If you connect to the Internet through a DSL modem or cable
modem, reconnect the power supply to this device. The
indicator lights flash and then stop. The modem is ready for
use.
6 Attach the AC adapter to the SOHO 6. Connect the AC adapter
to a power supply.
7 Restart your computer.
See "Factory Default Settings" on page 25 for the factory default
configuration options. See "External Network Configuration" on
page 31 and "Configuring the Trusted Network" on page 36 for
special configurations.
22 WatchGuard Firebox SOHO 6