Watchguard Firebox SOHO 6 User Manual page 43

Watchguard firebox soho 6 firewall: user guide
Hide thumbs Also See for Firebox SOHO 6:
Table of Contents

Advertisement

The base model SOHO 6 includes a ten-seat license. This license
allows a maximum of ten appliances on the trusted network to
connect to the Internet at the same time. There can be more than
ten appliances on the trusted network, but the SOHO 6 will only
allow ten Internet connections. A seat is in use when an appliance
connects to the Internet and is free when the connection is broken.
License upgrades are available from the WatchGuard Web site:
http://www.watchguard.com/sales/buyonline.asp
To connect more than four appliances to the SOHO 6, these items
are necessary:
• An Ethernet hub
• A straight-through Ethernet cable, with RJ-45 connectors, for
each computer
• A straight-through Ethernet cable to connect each hub to the
SOHO 6
To connect more than four appliances to the SOHO 6, follow these
steps:
1
Shut down your computer. If you connect to the Internet
through a DSL modem or cable modem, disconnect the power
supply from this device.
2
Disconnect the Ethernet cable that runs from your DSL
modem, cable modem, or other Internet connection to your
computer. Connect the Ethernet cable to the WAN port on the
SOHO 6.
The SOHO 6 is connected directly to the modem or other Internet
connection.
3
Connect one end of the straight-through Ethernet cable
supplied with your SOHO 6 to one of the four numbered
Ethernet ports (labeled 0-3) on the SOHO 6. Connect the other
end to the uplink port of the Ethernet hub.
The SOHO 6 is connected to the Internet and your Ethernet hub.
User Guide
Physically Connecting to the SOHO 6
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents