Lanner NCA-4210 User Manual page 33

Hide thumbs Also See for NCA-4210:

Table of Contents

NCA-4210 User Manual

NCA-4210 supports one Ethernet NIC module space to expand its network throughput. Please follow the

instructions below.

Note: For information about compatible modules, please refer to the "Ordering Information" and "Optional

Accessories" sections, or contact Lanner Sales for more details.

1. Rotate and loosen the two (2) captive screws on the bezel of the module slot and then remove the bezel.

2. Position the gold finger of module as shown in the image below. When sliding the module into the slot,

make sure the module stays in the guides of the expansion slot.

3. Slide the Ethernet NIC module into the space, until it is firmly attached.

4. Secure the module with two (2) captive screws on the bezel.

Table of Contents