Table of Contents
Advertisement
NCA-4210 User Manual
The motherboard supports DDR4 ECC/UDIMM up to 2,400MHz memory at max. 16GB per socket. Please
follow the steps below to install the DIMM memory modules.
1. Power off the system and locate the DDR DIMM slot.
2. Pull open the DIMM slot latches
3. Align the DIMM module and make sure the notches of the module aligned with the socket keys in the
slot.
4. Insert the module into the slot until it's firmly seated and close the latches.
27
Advertisement
Table of Contents
