Mounting Requirements - Endress+Hauser Liquiphant FTL64 Brief Operating Instructions
Point level switch for liquids in high-temperature applications
Hide thumbs
Also See for Liquiphant FTL64:
- Operating instructions manual (64 pages) ,
- Technical information (52 pages) ,
- Brief operating instructions (41 pages)
Table of Contents
Advertisement
Mounting
1
Installation examples for a vessel, tank or pipe
5.1
Mounting requirements
NOTICE
Scratches or impacts damage the coated surface of the device.
‣
Ensure the device is handled properly and professionally during all mounting work.
5.1.1
Pay attention to the temperature for devices with a PFA coating (conductive)
The difference in temperature between the outer and inner side of the flange may not exceed
60 °C (140 °F).
If necessary, use external insulation.
8
Liquiphant FTL64 HART
A0042329
Endress+Hauser
Advertisement
Table of Contents
