SANY SCM2000C-8S Safety, Operation & Maintenance Manual/Parts List page 6

Duty of Owners or Other Authorized Personnel
•
Only after each person involved in the product's operation, maintenance and repair is trained
and fully understands the Parts Book and Operation and Maintenance Manual, can they operate
and maintain the milling machine.
•
Ensure the operation and maintenance personnel are qualified and know their related
responsibilities.
•
Periodically check related personnel's safety consciousness during working.
•
If any fault which will lead to unsafety occurs, stop the milling machine immediately.
•
If necessary Sany service personnel have the right to check the milling machine for safety.
•
Besides check items regulated by Sany, observe local laws and regulations to check the milling
machine.
•
Ensure timely maintenance and repair on the milling machine.
•
Carefully plan the use of the milling machine.
Duty of all Working Personnel
•
If there is any abnormal symptom which may cause abnormal working of the milling machine or
potential hazard, report to your leader. If possible, correct fault in time.
•
All personnel working around the milling machine must observe all warning signals and take
care of their own and others' safety.
•
All personnel should know their working tasks and procedures.
•
Watch something like high voltage wire, unrelated personnel and poor ground for potential dan-
ger, and report to the operators and signalmen.
Duty of Managers
•
Ensure the operators are trained and fully understand the Operation and Maintenance Manual
supplied by Sany. Ensure they are in physical fitness and have the certification of operation. Oth-
erwise, it is forbidden to operate the milling machine.
•
Ensure the operators have good judgement ability, teamwork consciousness and psychological
quality. Otherwise, it is forbidden to operate or repair the milling machine.
•
Ensure the signalmen have good vision and acoustic judgement, master standard command sig-
nals. At the same time, they should have enough experience in recognizing danger factors cor-
rectly, and inform the operators of danger factors to avoid them in time.
•
Ensure assistant workers can identify the model and working condition to choose a proper mill-
ing machine.
•
Publicize safety consciousness to working personnel, and make them aware of safety precau-
tions and their related responsibilities.
2 Safety, Operation and Maintenance Manual-April 2020
Find manuals at https://best-manuals.com
SCM2000C-8S Milling Machine