Table of Contents
Advertisement
SCM2000C-8S Milling Machine
NOTICE
•
Before starting the machine, read the
manual carefully.
•
Information or illustrations in this man-
ual must not be duplicated, reproduced
or distributed, or employed for competi-
tive purposes. Sany explicitly reserves
all rights of possession thereof.
2.1.2 Applicable Range of the Machine
1. Intended use
The equipment is mainly designed for the fol-
lowing operations:
•
Milling the asphalt layer and the cement
concrete layer whose thickness is below
3cm for express highways, first-grade high-
ways, municipal roads, airports, goods yard
and parking lots;
•
Solving problems of cracks, tracks, loose-
ness, sinkage and defunctionalization of the
surface on asphalt road pavements;
•
Efficiently handling problems of crown, pot
holes, pitting surface and exposed aggre-
gate on cement concrete road pavements;
•
Used for mining on open mines after having
been properly converted;
•
Widely used in the recycling of road
pavements.
2. Prohibited operation
•
Persons under the influence of alcohol,
medication or drugs are not allowed to op-
erate, service or repair the equipment.
•
The machine is only permissible as a com-
mercial application on a closed road. Travel
Safety, Operation and Maintenance Manual-April 2020
Fig.2-2
Safety
2-7
Advertisement
Table of Contents
Need help?
Do you have a question about the SCM2000C-8S and is the answer not in the manual?