Table of Contents
Advertisement
SCM2000C-8S Milling Machine
Introduction
manual within easy reach for your reference.
Replace it if it is lost or damaged. Due to im-
provement and updating of products, some in-
formation may differ from your equipment. If
you have any question on your equipment,
contact your Sany distributor before operating
or maintaining the equipment.
1. Introduction
This section provides an overview of what is
covered in the rest of this manual, including
machine label information and Sany contact
information.
2. Safety
This section covers basic safety information
relating to this equipment. Make sure you fully
understand all the precautions described in
this manual and the safety labels on the ma-
chine before operating or maintaining this ma-
chine. Failure to do so may result in serious
injury or death.
3. System Functions
This section provides an overview of all the
controls and prompt & operating systems on
your equipment. Only when you are familiar
with all systems, can you operate and main-
tain the equipment safely.
4. Operation
This section provides the basic operating pro-
cedures for the job. It is important to study
and become familiar with all procedures be-
fore performing any operations with the
equipment.
5. Maintenance
This section provides all general maintenance
and repair procedures. It is important to study
and become familiar with all the maintenance
and repair procedures before performing any
Safety, Operation and Maintenance Manual-April 2020
1-5
Advertisement
Table of Contents
Need help?
Do you have a question about the SCM2000C-8S and is the answer not in the manual?