SANY SCM2000C-8S Safety, Operation & Maintenance Manual/Parts List page 28

Safety
Equipments covered by this manual are used
for various operations
conditions.
Before starting operation and maintenance,
operator and maintainer shall observe the fol-
lowing items.
•
Read and understand the whole manual.
•
Read and understand the safety notices
contained in this manual and the safety
messages on the equipment.
•
Never apply or operate your equipment
under any circumstances in a manner that
is prohibited in this manual.
The manual should be kept in the cab all the
time for operator to refer to at any time. Con-
tact Sany dealer to obtain a new manual if the
original one is missing or cannot be read.
This manual should be regarded as a perma-
nent component of your equipment. If the
equipment is sold to a third party, give this
manual to the new owner. The equipment pro-
vided by Sany Heavy Industry Co., Ltd to its
buyer is in line with all specifications and
standards of buyer's country. If the equipment
is purchased from another country or some-
one of a third country, it might be lacking of
some safety devices or technical require-
ments necessary for using the equipment in
your country. In case you question whether
the equipment is in accordance with the
standards and specifications of your country,
contact Sany dealer before operating the
equipment.
2-6
under normal
Safety, Operation and Maintenance Manual-April 2020
SCM2000C-8S Milling Machine
Fig.2-1