Advertisement
www.max.us.com
SYMPTOM
www.max.us.com
"RANGE OK"
LED is OFF
for Edge 1 (or 2)
"RANGE OK"
LED is OFF intermittently
for Edge 1 (or 2)
13
TROUBLESHOOTING
POSSIBLE CAUSE
Poor range is detected between Wi
Edge Rx and Wi Tx Edge 1 (or 2)
Tx or Rx PAIR
LED Blinking indicate pairing mode
SOLUTION
1) Check if Batt Low LED is ON,
indicating low battery if so change
batteries
2) Wi Tx Edge 1 (or 2) is too far away.
Move or reposition Wi Tx Edge 1 (or 2)
1) Choose different RF channel for Wi
Edge Rx and Tx Edge 1 or 2 (see p 7)
2) Lower RF power on Wi Edge Rx and
Tx Edge 1 or 2 (see p 8)
13
Advertisement
