Using The House Current - Sony DCR-SC100 Operating Instructions Manual

Uso de fuentes de
alimentation alternativas
Using alternative power
sources
Using the house current
To use the supplied AC power adaptor:
(1) Insert the connecting plate in the camcorder.
(2)
Connect the connecting cord to the DC OUT
jack on the AC power adaptor.
(3)
Connect the AC power cord to a wall outlet.
Uso de corriente dom&tica
Para emplear el adaptador de alimentacion i
CA suministrado:
(1) lnserte la placa de conexion en la
videocamara.
(2)
Conecte el cable de conexion a la toma D
OUT del adaptador de alimentacion de C
(3)
Conecte el cable de alimentacion a la torr
corriente.
To remove the connecting plate
The connecting plate is removed in the same way
as the battery pack.
WARNING
The power cord lead must only be changed at a
qualified service shop.
PRECAUTION
The set is not disconnected from the AC power
source (house current) as long as it is connected
to the wall outlet, even if the set itself has been
turned off. -
Para extraer la placa de conexior
Esta placa se extrae de la misma forma que
paquete de pilas.
AVISO
El cable de alimentacion debe sustituirse
unicamente en un centro de servicio tecnicc
especializado.
PRECAUCION
La unidad no estara desconectada de la fuel
alimentacion de CA (toma de corriente) mk
este conectada a la toma de red, aunque la
i
apagado.
|