Integrated Power Supply 100 - 240 V Ac (Option Am3) - E+E Elektronik EE310 User Manual

High-end humidity and temperature sensor for industrial applications

Hide thumbs Also See for EE310:

Table of Contents

Error Indication Mode

When error indication mode is selected, various errors will trigger the alarm output.

Error occurs

No error

open

Terminal 5-6

closed

Fig. 20

Example of error mode on relay 1 using normal state inverted.

PLEASE NOTE

An alarm output in this operation mode is used for error indication only (no combination with switching points

possible).

PLEASE NOTE

When error indication mode is selected, various errors will trigger the alarm output. An alarm output in this

operation mode is used for error indication only.

5.2

Integrated Power Supply 100 - 240 V AC (Option AM3)

This module allows the EE310 to be powered with 100 - 240 V AC (50/60 Hz), 2 VA.

Enclosure

Polycarbonate

Fig. 21

Power supply module (option AM3)

Pin assignment of the plug connection: please refer to chapter

WARNING

The AM3 option includes a 1.25 A fuse on the 100 - 240 V side. This fuse may not be replaced by the user,

only by the E+E after sales service.

The protection of the supply cable against excess current and short-circuit must be designated to a wire

cross section of 0.8 mm

The metal enclosure must be grounded during operation.

All national regulations for installation shall be observed!

Normal state: Inverted

(AWG 18) (6 A fuse).

Stainless steel

User Manual EE310

Humidity and Temperature Sensor | 22

Table of Contents