Table of Contents
Advertisement
WARNING
Non-compliance with the product documentation may cause accidents, personal injury or property damage.
▪
Mounting, installation, commissioning, start-up, operation and maintenance of the device may be
performed by qualified staff only. Such staff must be authorized by the operator of the facility to carry out
the mentioned activities.
▪
The qualified staff must have read and understood this user manual and must follow the instructions
contained within.
▪
All process and electrical connections shall be thoroughly checked by authorized staff before putting the
device into operation.
▪
Do not install or start-up a device supposed to be faulty. Make sure that such devices are not accidentally
used by marking them clearly as faulty.
▪
A faulty device shall be removed from the process.
▪
Service operations other than described in this user manual may only be performed by the manufacturer.
1.3
Environmental Aspects
PLEASE NOTE
Products from E+E Elektronik Ges.m.b.H. are developed and manufactured in compliance with all relevant
environmental protection requirements. Please observe local regulations for the disposal of the device.
For disposal, the individual components of the device must be separated according to local recycling
regulations. The electronics shall be disposed of correctly as electronics waste.
1.4
ESD Protection
The sensing elements and the electronics board are ESD (electrostatic discharge) sensitive components
of the device and must be handled as such. The failure to do so may damage the device by
electrostatic discharges when touching exposed sensitive components.
2 Scope of Supply
▪
CDS201 Room Sensor for CO
▪
Mounting set
▪
Quick Guide for digital version
, Temperature and Humidity according to ordering guide
2
User Manual CDS201
CO
, Humidity and Temperature Room Sensor | 6
2
Advertisement
Table of Contents
