Table of Contents
Advertisement
Enter a PIN Code for the First Time
A1 - Set Up PIN Code
A PIN Code can be programmed into the pump to
protect the settings from inadvertently being changed
by unauthorized users.
1. Press the UP ARROW button for 10
seconds.
The LED next to the LOCK ICON on the
display lights, indicating it is in PIN
Mode.
2. The word OFF appears on the
display. Press the UP and
DOWN ARROW buttons to
change to ON.
3. Press the ENTER button to
enter the PIN Code.
4. The cursor automatically
positions to enter the first
character of the PIN Code.
Use the UP and DOWN
ARROW buttons to move
through the numbers 0-9, until the first number in
the PIN code is displayed in the field.
5. Press the ENTER button to set the
number. The cursor automatically
moves to the next number field.
6. Repeat steps 4 and 5 for each PIN
Code prompt field.
7. Press the ENTER button to save the
PIN Code and exit Advanced Setup.
3A5082N
Enter Advanced Setup
Press the UP ARROW button for 10
seconds.
If the pump was previously set to require a
PIN Code, the LED next to the LOCK ICON
lights, indicating a PIN Code is required.
1. The cursor automatically
positions to enter the first
character of the PIN Code.
Use the UP and DOWN
ARROW buttons to move
through the numbers 0-9, until the first number in
the PIN code is displayed in the field.
2. Press the ENTER button to set the
number. The cursor automatically
moves to the next number field.
3. Repeat steps 1 and 2 for each PIN
Code prompt field.
If the PIN Code entered is correct, the first editable
character on the display flashes.
Pump
41
Advertisement
Table of Contents
